Announcement

Collapse
No announcement yet.

Track Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BIG E
    commented on 's reply
    Good find, Jeff! MnFordGuy, this is the track adapter you want, it allows connecting to older AF/X FUN track sections like the "Banked S Curves" -- which for some reason weren't carried over to the newer AFX track series. Always loved running T Jets on them. I also acquired a few pairs of 9" straight adapter to go from original AF/X to Model Motoring lock and joiner track, so you can really mix it up for more HO racing FUN! These sections are unfortunately getting a bit pricey as of late, but if they are NOS or in good used condition, are well worth the money. They're shown as out of stock at the moment, let's hope they are back soon, as they get snapped up quickly!
    Enjoy! -- Ernie
    Last edited by BIG E; February 3, 2022, 01:44 PM.

  • HO RacePro
    commented on 's reply
    If a set of these adapter track sections can sell for US$100 there is a business opportunity for someone who can Frankentrack them.

  • Norman
    replied
    Sent you a PM, MnFordGuy.

    Leave a comment:


  • MnFordGuy
    commented on 's reply
    Thank Fitzy. I’m watching these. Saw a couple more going on Flea Bay for over $100!!!

  • Fitzy
    replied
    These are the ones prob be worth a few bucks just to click them together

    https://www.ebay.com/itm/13400915573...cAAOSwdtNh9IpO

    Leave a comment:


  • Model Murdering
    commented on 's reply
    Yup. Good eye. I got blinded by the expertly applied sticker!

  • MnFordGuy
    commented on 's reply
    Thank you Ed…looks like I’ll need to go that route. The 70605 adapter’s been discontinued, and looks like it is not available. I have plenty of track to work with, so I can screw up one or two😀

  • MnFordGuy
    replied
    Yes I see that now!!! Thank you gentlemen for the help. Want to get an HO layout for my son without going down another rabbit hole…(already doing 1/32 and 1/25….but my son is crazy for HO). Forgot how much fun the little cars are!

    Leave a comment:


  • HO RacePro
    replied
    If you cannot find ready-made adapters it is possible to create them from two sections of track -- one of each type. You need to remove the power rails from both sections, cut each in half, position mismatched halves to make a pair of adapters, reinstall the rails and glue those halves together. The rails will help align the halves before gluing.

    You'll probably need to grind away the rail tabs under the track sections to get the rails loose. A Dremel tool does this easily. Be careful not to overheat the plastic while grinding.

    You may also need to bend the ends of the rails to match those in the track type you are adapting to. You can superglue the rails in place from underneath. You can reinforce the joints by gluing scrap plastic across the joints underneath the track sections.

    If you make nice, square cuts in the track sections and do all your gluing underneath your surgery will be almost invisible. Honest.

    This whole procedure has been called "Frankentracking". You can use it to create custom track sections, such as special-length straights and special-angle curves. If you need a 13 inch straight or a 25-degree curve this is your ticket. Really not hard to do, and sometimes the only good solution.
    Last edited by HO RacePro; January 30, 2022, 12:43 PM.

    Leave a comment:


  • WB2
    commented on 's reply
    The ends are identical because there are two adapter tracks put together.
    Look at the center and you can see the joint which matches the drawing above.

  • Model Murdering
    replied
    What is pictured is not an adapter. The ends are identical. Pictured is what was originally known as a "make up" piece.

    Leave a comment:


  • MnFordGuy
    replied
    Thanks Fitzy….I’ve seen this one…
    Im trying to connect the AFX track with these tabs …please excuse my 1st grade art…., or is that one compatible?Click image for larger version

Name:	005F6A9B-9830-4A44-8D10-1FD661F92CD3.jpg
Views:	256
Size:	3.16 MB
ID:	146489

    Leave a comment:


  • Fitzy
    replied
    Check this out I think it's what your looking for

    https://www.rcsuperstore.com/afx-ada...sections-pair/

    Leave a comment:


  • MnFordGuy
    started a topic Track Question

    Track Question

    Dipping my toe back into HO…been a log time. My question is this….is the an adapter track that will work between my mid 70s AFX track to the newer Tomy/AFX (AW) track? I have tons of the older track I want to use if possible. I have not been able to source an adapter track.
    Thanks!!!
Working...
X
UA-149438709-1