Announcement

Collapse
No announcement yet.

Diecast 356 Speedster.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Barc 1
    replied
    As you wished Peter. Gearing is about 8:20

    Click image for larger version

Name:	P1070785.jpg
Views:	85
Size:	242.7 KB
ID:	31762Click image for larger version

Name:	P1070788.jpg
Views:	78
Size:	314.3 KB
ID:	31763Click image for larger version

Name:	P1070789.jpg
Views:	66
Size:	372.6 KB
ID:	31764

    Leave a comment:


  • pfuetze
    replied
    very nice conversion, Dan!

    what gearing are you using on that motor?

    The nice cabrio needs a driver figure - maybe a lady with a scarf flying in the wind?

    Leave a comment:


  • Busterfla
    replied
    Cool project, thanks for showing it

    Buster

    Leave a comment:


  • Barc 1
    started a topic Diecast 356 Speedster.

    Diecast 356 Speedster.

    I have had this little diecast sitting in the parking lot on my track as a scenic prop. Last night while waiting for paint to dry on my other project, I decided to have a close look at this Speedster. I drill out two rivets and separated the plastic chassis for the die cast shell. The thing that intrigued me about this was how light it was for a diecast model, and thought it might make a good slot car. Turns out nothing could have been easier as their was room for a mini Minebea(half the size of the regular BARC motor, configured as a sidewinder, I little modification to the plastic interior piece to make room for a sidewinder gear was all it took. I used the wheels from the model and found some rubber for the rear wheels. The hole in the chassis for the front rivet was used for a guide post. I sleeved in the appropriate sized plastic tubing to act as the guide post. Next I added a brass plate to lower the COG and make it a decent runner.

    I got this done quicker then it took for the paint to dry on my other project, and ended up with a nice looking slot car.

    Click image for larger version

Name:	P1070783.jpg
Views:	183
Size:	272.5 KB
ID:	31548Click image for larger version

Name:	P1070781.jpg
Views:	142
Size:	275.6 KB
ID:	31549Click image for larger version

Name:	P1070782.jpg
Views:	125
Size:	335.5 KB
ID:	31550
Working...
X
UA-149438709-1