Announcement

Collapse
No announcement yet.

Tire Mounting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • slothead
    commented on 's reply
    thank you.

  • HomeRacingWorld
    replied
    Well, the article is for tires/wheels that have no inner rib that MUST be glued. Without the inner rib, the tires need to be placed on the wheel true so that there is no wobble to them.

    I don’t think I have any standard ready to run 1/32 wheels that do not have a rib.

    For standard wheels I just install the tires and roll them on a flat surface using light pressure to make sure they are seated fully.

    Leave a comment:


  • slothead
    replied
    I put PG tires on all my wood road course cars but don't replace the wheels on RTR cars (Scalextric, Pioneer, Fly, MRRC, etc.). Do you have a particular method for mounting tires on stock plastic wheels that don't have a hollowed out cavity for inserts?

    Leave a comment:


  • HomeRacingWorld
    started a topic Tire Mounting

    Tire Mounting

    Couple folks asked about this, so sharing again. Still my way of doing it.

    PAUL GAGE TIRE MOUNTING
Working...
X
UA-149438709-1