Announcement

Collapse
No announcement yet.

Camaro sportsman

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Camaro sportsman

    Built a brass rod chassis for an old school Camaro sportsman.
    Using a new Predator 17.5K motor, Pro-Track wheels, Urethane tires,
    JK guide tongue, HR motor bracket, 9:27 gears, don't know where the guide is from.
    (found in my parts drawer)

    Click image for larger version  Name:	IMG_6936.jpg Views:	0 Size:	275.3 KB ID:	135449


    Resin cast of an early year Camaro. I used yellow pigment in the resin, so no painting the body.
    styrene roll cage, resin driver on .060 styrene card, home-printed decals on clear media with a coat of floor wax.

    Click image for larger version  Name:	IMG_6940.jpg Views:	0 Size:	133.8 KB ID:	135450
    Click image for larger version  Name:	IMG_6941.jpg Views:	0 Size:	299.4 KB ID:	135452
    Click image for larger version  Name:	IMG_6942.jpg Views:	0 Size:	180.7 KB ID:	135453
    Click image for larger version  Name:	IMG_6943.jpg Views:	0 Size:	227.7 KB ID:	135454
    Click image for larger version  Name:	IMG_6944.jpg Views:	0 Size:	171.7 KB ID:	135456
    Click image for larger version  Name:	IMG_6946.jpg Views:	0 Size:	177.5 KB ID:	135457
    Attached Files
    Last edited by strangebrew; December 4, 2021, 01:52 PM.
    Dave J
    Millstadt, Illinois

  • #2
    Mr. Brew, Another fine looking ride.
    Robert- Shoreline Model Raceways Club
    Connecticut, U.S.A.

    Comment


    • #3
      Dave, that's enough already. You got to cut back a little and build like some of the rest of us!!
      Matt B
      So. In
      Crashers

      Comment


      • #4
        Looks great Dave. Where do you get the Pro Track wheels? They are perfect for the Sportsman cars.
        Brad
        Ayton, ON Canada

        Comment


        • strangebrew
          strangebrew commented
          Editing a comment
          I contacted a guy named Robert Herman ([email protected] .com). I bought a couple hundred pairs of 1/2" wide Daytona Stocker wheels
          without tires. Paul Gage 22160 tires fit very well, although the combination results in a tad bit shorter piece.
          I sent pictures of what I build to help facilitate the transaction.
          Keep in mind I use 1/8 inch axles

        • Brad_T
          Brad_T commented
          Editing a comment
          Thanks Mark. I don't mind if they have 1/8" axles, they can always be sleeved for 3/32 if needed.
      Working...
      X
      UA-149438709-1