Help with SSD 7005 chip into Policar Toyota GT86

[Poss1970]

I need some help with installing a Scalextric chip 7005. Has anyone done one of these yet?

[docdoom]

Well 1st thing is to remove all the stock electric wiring. next I would place the chip in the same location as what they have for that analog board and drill my hole for the led . I like to use the stock guild wire and solder to the chip guild wires green and yellow. make sure when you solder the leads to the motor that they are not touching the metal on the motor can our you will fry the chip the second you add power, to be safe add some electrical tape to the can.. also if you find the car runs back wards, reverse the guild wires.

[Zippideedooda]

Great suggestion on the electrical tape Doc!