Announcement

Collapse
No announcement yet.

problem with printing of ferrari 350 can am and autocoast 22

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • problem with printing of ferrari 350 can am and autocoast 22



    I'm having trouble with a couple of files to print: the first, that of the ferrari 350 can am, I can't print it decently, because the walls are too thin, could someone help me? the second is autocoast 22, and it presents the same problem.




















  • #2
    You probably need to adjust your slicer settings. I can't see any pictures. You should take screenshots of all of the settings in your slicer.

    Both of these files print well, although the Ferrari is definitely thicker than the Ti22.
    Come Race at The Trace!
    Timberline Trace International Raceway - SW of Mpls, MN
    https://cults3d.com/en/users/chappyman662/creations

    Comment


    • #3

      what is the data filter?

      Comment


      • #4
        Perhaps we are having a language issue.
        I don't know what the data filter would be.

        The slicer is the program that creates the gcode for the printer. Cura, Simplify3D, PrusaSlicer, and I am sure there are others. Many people (including me) use Cura because it's free and open source. The settings in the slicer make a significant difference in the quality of the print.
        Come Race at The Trace!
        Timberline Trace International Raceway - SW of Mpls, MN
        https://cults3d.com/en/users/chappyman662/creations

        Comment


        • #5
          Yes I think is a language problem­čśÄ
          I use Ideamaker and no problem I have printed some other like the Nissan 382
          ,Ferrari712 , Honker and Hussein .
          At this moment only problem with the 350 and the T22 .
          I can not understand

          Comment

          Working...
          X
          UA-149438709-1