Announcement

Collapse
No announcement yet.

STL files for bodies and chassis somewhere ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • STL files for bodies and chassis somewhere ?

    Hi,

    I'm the owner of a FDM printer wich can print in PLA and ABS plastic, I'm wondering if there is a stl files listing somewhere of (free or pay) cars and chassis models to print ? thank you !

  • #2
    Pm sent

    cheers
    NimROD

    Comment


    • #3
      There are several chassis / guide / interior options up on Thingiverse.

      I see that the Master of The Files has contacted you already......
      Come Race at The Trace!
      Timberline Trace International Raceway - SW of Mpls, MN

      Comment


      • #4
        I wouldn't trust a 3DP guide in a proxy...unless it was Nylon.

        Comment


        • #5
          thank you for your answers,

          For a guide, I would trust an ABS fine printing, personaly.

          Comment


          • #6
            Well....all I can offer is my experience.
            I print in PLA at 100% infill and have only broken a guide in two situations: a rider going full speed into the wall at the end of a 15ft straight, and when used with a chassis with insufficient rotation.

            If they break in other situations it's generally a printing flaw that can be fixed in the settings, usually. I did have a bad batch do that once (I print 6 at a time).

            But that's why printed guides are encouraged but not required in the 3 DP proxy.
            Come Race at The Trace!
            Timberline Trace International Raceway - SW of Mpls, MN

            Comment

            Working...
            X
            UA-149438709-1