Announcement

Collapse
No announcement yet.

My 3dp adventures

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • alexis in greece
    replied
    Here are 3dp chassis for 3 out 4 Stratos (or Strata?) from left to right Team Slot (its a straight fit),SCX(need to add 2 body posts),Ninco(need to add 2 bodyposts for snap fit guide or 4 bodyposts for grub screw guide)




    Leave a comment:


  • alexis in greece
    replied
    After a successful left eye cataract surgery that prevents me from working long hours on the computer for a while ,i had the oportunity of doing some work that do not need it,completing some previously started projects.First off the Lancia Stratos by Scalextric i have printed the chassis a while ago but did not have time to fit it













    Now all 4 available Stratos (Scalextric,SCX,Team Slot,Ninco)have a chassis they deserve

    Leave a comment:


  • alexis in greece
    replied
    New chassis for Ferrari F2002 Pro Slot,there is also a long can version picture will be added later.












    Leave a comment:


  • alexis in greece
    replied
    Chassis for Ferrari 612 Can Am Dart body with slimline AW motor pod Slot.it compatible









    Leave a comment:


  • alexis in greece
    replied
    My first 1/24 Alfa Romeo GTA 1600 Gunze.Next 1/24s Tamiya Mini,Heller Renault R8 Gordini,Mr Hobb6y Alfa Romeo GTam.

    Leave a comment:


  • drvanski
    commented on 's reply
    Does a Slot.it pod fit this chassis? Do you sell any of these? Nice job on all the different chassis you are printing.

  • glasshorsevh
    commented on 's reply
    Now we’re talking!

  • alexis in greece
    replied
    Porsche 356B coupe possibly Aurora


    Leave a comment:


  • alexis in greece
    replied
    Chevy '55 Monogram snaptite kit


    Leave a comment:


  • alexis in greece
    replied
    Porsche 356 Ninco


    Leave a comment:


  • alexis in greece
    replied
    And Ninco Stratos



    Leave a comment:


  • alexis in greece
    replied
    New chassis Lancia Stratos SCX,it was a bit difficult as it is tiny and original chassis has only 2 bidy posts but I found a solution by adding a couple.I also had to cut the exausts from the original chassis and glue them to the body.Ninco Startos is coming up next probably during the day if the chassis priting right now is good







    Leave a comment:


  • alexis in greece
    replied
    Volvo Amazon 122S by
    Steve Francis







    Leave a comment:


  • alexis in greece
    replied
    Lancia 037 Ninco

    Leave a comment:


  • alexis in greece
    replied

    New chassis Porsche 997 Ninco

    • 0

    Leave a comment:

Working...
X
UA-149438709-1