Announcement

Collapse
No announcement yet.

Looking for 3D printer files

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Looking for 3D printer files

    Greetings All...

    I'm looking for 3D printer files (.stl) for sitting spectator types.I can find plenty (dozens!) of standing people on Thingiverse, but sitting people are all but non-existent.

    If anyone knows of any such files, would you be willing to share the links, or maybe email them to me at [email protected]?

    Thanks in Advance!

    Bill W.
    We don't stop playing games because we grow old, we grow old because we stop playing games!

  • #2
    Are you looking for sitting drivers? If so, try Thingiverse. I have seen several.

    Comment


    • #3
      Here's 3 sitting plus one kneeling from a large collection of general public:
      Chris From Rocketbrand Studios http://rocketbrandstudios.com/ Scanned with The Scan-O-Tron 3000 (http://www.thingiverse.com/thing:127968), ReconstructMe (http://reconstructMe.net) and an Xbox Kinect at the Great Fredini's Coney Island Scan-A-Rama booth at the 2013 World Maker Faire New York. The Great Fredini's Coney Island Scan-A-Rama is the next generation portrait studio for the 21st century! In the grand tradition of amusement part portraiture, but updated for the era of 3D printing, this popup 3D portrait studio is open weekly in Coney Island and can even appear at your event. For more information or to order prints, please visit http://www.thegreatfredini.com/scan-a-rama For best results, I recommend printing at .1 mm layer height with no support. You may have to add a few little support cylinders manually, and trim a couple bits of hanging plastic off, but you will get a better result with no support.

      Scanned with ReconstructMe in the Great Fredini's Coney Island Scan-A Rama Booth at Westport CT Makerfaire 4/27/2013. Coney Island Scan-A-Rama is a next generation portrait studio for the 21st century! In the grand tradition of amusement part portraiture, but updated for the era of 3D printing, this popup 3D portrait studio will be appearing at Maker Faires and in Coney Island throughout 2013. For more information or to order prints, please visit http://www.thegreatfredini.com/scan-a-rama

      Scanned with ReconstructMe in the Great Fredini's Coney Island Scan-A Rama Booth at Westport CT Makerfaire 4/27/2013. Coney Island Scan-A-Rama is a next generation portrait studio for the 21st century! In the grand tradition of amusement part portraiture, but updated for the era of 3D printing, this popup 3D portrait studio will be appearing at Maker Faires and in Coney Island throughout 2013. For more information or to order prints, please visit http://www.thegreatfredini.com/scan-a-rama

      Scanned with ReconstructMe in the Great Fredini's Coney Island Scan-A Rama Booth at Westport CT Makerfaire 4/27/2013. Coney Island Scan-A-Rama is a next generation portrait studio for the 21st century! In the grand tradition of amusement part portraiture, but updated for the era of 3D printing, this popup 3D portrait studio will be appearing at Maker Faires and in Coney Island throughout 2013. For more information or to order prints, please visit http://www.thegreatfredini.com/scan-a-rama
      Kevan - Isle of Man
      Life is like a box of Slot cars...🚓🚗🚚🚜

      Comment


      • #4
        Try searching for "sitting man" or "sitting woman"

        A young man sitting on a chair Scanned with a Kinect scanner using ReconstructMe and finished using Netfabb & Meshmixer. I used my turntable design at http://www.thingiverse.com/thing:785242 using a worm gear

        https://www.thingiverse.com/thing:516683 ( I would edit this one to remove the chair)



        You can also try CG Trader, TurboSquid, and some other sites......
        Last edited by chappyman66; August 4, 2020, 09:30 PM.
        Come Race at The Trace!
        Timberline Trace International Raceway - SW of Mpls, MN
        https://cults3d.com/en/users/chappyman662/creations

        Comment


        • #5
          Thanks Kevan and Chappyman66, every new body is a plus!

          I figure I need at least 300 seated spectators just to make the grandstands look good. 350+ is my goal (not to mention the 200 - 300 standing, walking, etc., spectators, track workers, and pit crews). The more variety, the merrier!

          Bill W.
          We don't stop playing games because we grow old, we grow old because we stop playing games!

          Comment


          • #6
            Sending you a file of 21 sitting peeps......let me know how they work.

            Comment


            • #7
              hi
              dont want to hijack this thread
              but .... does any1 know of any decent driver figures ? all eras
              the one on thingiverse has fingers like something out of "The Thing" movie 😀
              Kev
              Burnley
              England🇬🇧

              Comment


              • #8
                Did you see these. The full bodied driver has different heads for different eras.



                A full 1/32 driver for slot cars. I started with the Stearman pilot and combined with helmets/heads I found here using TinkerCAD. Full helmet with shield Full helmet without shield Open face helmet Cylon, just because... Will update as I update


                Western burbs of Chicago

                Comment


                • #9
                  Originally posted by Racer1h
                  Sending you a file of 21 sitting peeps......let me know how they work.
                  Thank You Sir!
                  First test run starting today.

                  bill W.
                  We don't stop playing games because we grow old, we grow old because we stop playing games!

                  Comment


                  • #10
                    [QUOTE=Junior;n48605]Did you see these. The full bodied driver has different heads for different eras.

                    yeppers saw these .... wanted full figure atleast to the knees ....could cut the arms and reattach .... was looking for a driver more than a pilot .... but if needs must ... but thnx for the reply
                    Kev
                    Burnley
                    England🇬🇧

                    Comment


                    • #11
                      Originally posted by Junior
                      Did you see these. The full bodied driver has different heads for different eras.



                      A full 1/32 driver for slot cars. I started with the Stearman pilot and combined with helmets/heads I found here using TinkerCAD. Full helmet with shield Full helmet without shield Open face helmet Cylon, just because... Will update as I update

                      They're not drivers but heli pilots, hence the joystick holding hands rather than steer wheel.
                      Kevan - Isle of Man
                      Life is like a box of Slot cars...🚓🚗🚚🚜

                      Comment


                      • Junior
                        Junior commented
                        Editing a comment
                        They are actually Stearman pilots with different heads. They are good enough for me, I used them in a couple of my Show-Me Showdown cars and look the part. There is a full modern driver in 3dwarehouse with a steering wheel and seat, search on racing driver. If you use Sketchup, you can remove the seat, and other objects. I just wasn't able to get it to a good print using it.

                    • #12
                      Here is pic of the driver from 3DWarehouse.
                      I have the stl if anyone wants it, just PM me
                      Click image for larger version

Name:	IMG-7233.jpg
Views:	279
Size:	106.7 KB
ID:	48700

                      Western burbs of Chicago

                      Comment


                      • Kevan
                        Kevan commented
                        Editing a comment
                        I love the fact he's got the throttle floored

                    • #13
                      Load it into Tinkercad and remove the stick, add a wheel. Easy.
                      Come Race at The Trace!
                      Timberline Trace International Raceway - SW of Mpls, MN
                      https://cults3d.com/en/users/chappyman662/creations

                      Comment


                      • #14
                        Going back to the original question, 3dwarehouse has a variety of people sitting that you can download.

                        3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.
                        Western burbs of Chicago

                        Comment


                        • #15
                          Here are couple examples on spectators on benches.
                          Load them into Tinkercad, remove the benches, and you have population for the grandstand or picnic tables.

                          Click image for larger version

Name:	IMG_20200831_104750.jpg
Views:	175
Size:	3.53 MB
ID:	51843

                          Click image for larger version

Name:	IMG_20200831_104739.jpg
Views:	155
Size:	3.88 MB
ID:	51844

                          They need some cleanup but the Ender does a decent job, if slow.
                          Come Race at The Trace!
                          Timberline Trace International Raceway - SW of Mpls, MN
                          https://cults3d.com/en/users/chappyman662/creations

                          Comment

                          Working...
                          X
                          😀
                          🥰
                          🤢
                          😎
                          😡
                          👍
                          👎
                          UA-149438709-1