Announcement

Collapse
No announcement yet.

Scale Car Garage - Cobra & Ferrari Build Pt. 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kitmen
    replied
    Nitromancer, thanks so very much for watching and for posting such a great comment!

    More to come!

    Thanks
    😀
    John

    Leave a comment:


  • Nitromancer
    replied
    Great video!
    Ive always wanted those two cars with similar performance to race.

    Leave a comment:


  • Kitmen
    replied
    chappyman66, thanks so much for watching and posting!

    I agree, both tools are great while each has its advantages!

    Thanks
    😀
    John

    Leave a comment:


  • chappyman66
    replied
    Yes, those Adjust-o-Jigs are nice....I have one too.
    The ceramic works better for soldering but for alignment they are great.

    Leave a comment:


  • Kitmen
    replied
    Williamg, thanks so much for watching and for your post!

    The car seemed weak when breaking on the track and you are correct, that's most likely due to the motor. However another possibility is the gearing. I am intending to replace the stock crown gear of the Cobra which (I hope) will solve the problem.

    I'm pleased that you like the Russ Kit Adjust-O-Jig! It does work quite well and can be used for 1/32 scale and 1/24, 1/25 scale cars!

    Thanks
    😀
    John

    Leave a comment:


  • williamg
    replied
    If I'm remembering correctly that monogram motor is a candidate for cutting up too. Weak brakes? Been a few years since that car came out so don't hold me to it.
    I like the jjg you have. Seems to work great, better than the pin boards.

    Leave a comment:


  • Kitmen
    started a topic Scale Car Garage - Cobra & Ferrari Build Pt. 1

    Scale Car Garage - Cobra & Ferrari Build Pt. 1

    Here is part one of the build of a 1/32 scale Cobra Daytona Coupe and a Ferrari 250 GTO:



    Any and all comments are more than welcomed!

    Thanks
    😀
    John
Working...
X
UA-149438709-1