Policar BRZ

[sivad]

Looking for tire and tuning Suggestions? The car runs good out of the Box but I know there's more potential.

[MrFlippant]

What have you done so far?

[sivad]

Not a thing. But the rear tires a Lampe out for the box

[MrFlippant]

Are you using it with traction magnets, or without?

[sivad]

I have the wood routed track the car is fresh out of the Box.

[MrFlippant]

Whelp, the first thing to do is glue and true all the tires. Coat the front tires with superglue to eliminate grip. then test it out. IT's a tall and narrow car, so will want to tip over, so I wouldn't necessarily go for body float, but I might add weight to the chassis.

[Bal r 14]

I think you will need to replace the rear wheels, tires, and crown gear. It has plastic wheels and knurled axles. You have to pull the wheels and crown gear in order to remove the axles to true the tires.

If it was my car, I would convert the guide assembly to a Slotting deep wood guide, install a decent motor with a brass pinion, new rear axle with slot.it crown gear, CB design wheels, PG urethane or Quick slick silicone tires and some lead in the sides of frame next to the motor. That would about max out the potential short of doing some major work to lower it.