Tweet
I can't find rubber tires to fit the 14x8 CB DESIGN WHEELS
-
Austin
Merrimack, NH -
Nsr i think they have a tire. To fit Thunder slot -
I don't know for sure, but maybe the NSR Formula 1 tires? Should fit tight on the wheel, and yeah, you'll have to trim the width....
Dickie Pearson
Canterbury, NH
HOST - Home Operated Slot Tracks
MSR - Main Street RacingComment
-
Been told thunderslot will work. I'm in the same boat trying to find RUBBER TIRES to fit 14 × 8 rims.THE other Vancouver aka Vancouver Washington across the river from keep Portland weird....
Member NASTE (Northwest Association of Slot Track Enthusiasts)Comment
-
BRM Tires.Comment
-
The Imp with stripes is on Thunderslot tires with a 14x 8 rear CBD wheel. The fronts are trued down rears off a 1/43 car I believe. And the other has trued down PGs on the front.
The Jester
of Da Lou (St. Louis) but from
the Soxside (Chicago)Comment
-
If they're for a stock car look BRM Nascar tyres might do the trick. These are for a 5mm centre ridge. - BRM NASCAR | Pendleslotracing.co.ukBram,
CHCH NZComment
-
14.5x8.9mm
BRM S-129SE Tires (4) Fit 'NASCAR' S-128 Wheels 22 SHORE
BRM S-129SG Tires (4) Fit 'NASCAR' S-128 Wheels 15 SHORE
Thanks Every one for the help
thunderslot my SIDEWINDER GEARS hit the selup block and the chassis is to low
NSR Formula 1 if BRM does't work out
Austin
Merrimack, NHComment
Comment